Connecting Rod Material Channel

Connecting rod material channel is mainly used for automatic transmission between the upper and lower processes of connecting rod production line.

The working principle of the connecting rod material channel is: the gear motor is equipped with eccentric wheel and mechanical device, the circular motion of the motor is transformed into linear motion, and the V-shaped groove of the conveying material channel is driven for reciprocating linear motion. The small head of the connecting rod is placed in the peristaltic groove of the material passage of the connecting rod, and the round bracket on both sides supports the big head of the connecting rod, making the connecting rod upright and inclined forward. When the V-shaped groove is forward, due to the action of gravity, the friction force of the small head of the connecting rod is greater than the friction force of the supporting rod, making the connecting rod move forward. When the V-shaped groove is backward, the friction force of the big head is greater than the friction force of the small head. When the V-shaped slot moves forward again, the connecting rod moves forward one step further, and the connecting rod moves forward in the way of peristaltic step to realize the automatic transmission of the connecting rod to the purpose.

Features and advantages:

1. the connecting rod material path is installed with a lifting mechanism, used to adjust the height of the V-groove, change the tilt Angle of the conveying connecting rod, can meet the requirements of different specifications of connecting rod conveying. Height adjustment range: 60mm (can also be specially designed according to requirements).

2. connecting rod material path support rod width adjustable, width adjustment range: 30mm. (can also be specially designed according to requirements). To accommodate different sizes of connecting rods.

3. connecting rod material passage connecting rod big end support rod from the ground height: 800mm, height can be designed and adjusted according to requirements. The lower part has adjusting foot and fixing bracket fine adjustment.

4. The power drive of connecting rod material channel adopts integrated deceleration motor, power: 0.25Kw.

5. the standard reciprocating stroke of the connecting rod material path: 12mm, can also be designed according to the requirements to meet the requirements of various beats.

6. the connecting rod material road is provided with a number of gantry supports, and the spacing between the gantry supports is up to 1.6 meters.

7. The transmission mechanism of the connecting rod material channel is provided with a safety protective net cover.

8. The connecting rod material passage is equipped with a liquid collecting pan to collect the lubricating oil or cleaning liquid dripping on the connecting rod. The liquid collecting plate is made of 1mm plate with spray paint.

9. The discharge port at the end of the connecting rod material passage is equipped with a transverse blocking device to prevent the connecting rod from falling.