CNC Double End Grinding Machine SX100D-5W

1. The machine structure for heat insulation design, long-term continuous work, stable accuracy.

2. No matter how much of the end thickness allowance, you can complete the two-sided one-time grinding of the brake disc at one time.

3. The grinding wheel dressing frequency can be preset, when the number of machine tool processing reaches the set value, the grinding wheel automatically dressing; Manual trimming is also available.

4. Interlock safety configuration of wheel shield lifting and wheel rotation; Modified and grinding interlock safety configuration, safety factor is stable and reliable.

5. The processing area is fully closed, the protective door automatically switches.

6. With an independent coolant circulation system, with coolant constant temperature control function. The coolant system is equipped with two stages of filtration: one stage is precipitation filtration, the other stage is paper tape filter, the filtration accuracy is less than 20μm, with water level alarm.

Contact Now E-Mail Telephone

Product Details

CNC Double End Grinding Machine SX100D-5W,Carbon ceramic brake disc in order to solve the characteristics of wear and weight reduction and the use of special materials, but also brought difficult processing problems, this machine tool for the processing of carbon ceramic brake disc was born, my company has independent intellectual property rights, can complete the carbon ceramic brake disc at both ends of the same high-precision grinding.

CNC Double End Grinding Machine SX100D-5W

Working accuracy:

Parallel difference	0.008
Flatness	0.008
Thickness difference	0.015
Surface roughness	Ra0.32

Main technical parameters:

Item	Unit	Parameter
Maximum machining diameter	mm	450
Machining thickness	mm	5-80
Spindle diameter	mm	Ф100
Grinding head stroke	mm	120
Minimum feed quantity	mm	0.001
Spindle motor	kw	18×2
Grinding head feed motor	kw	1.8×2
Rotary motor	kw	2.5
Dimensions (length × width × height)	mm	3500×2400×1800

CNC Double End Grinding Machine SX100D-5W

The products of Rushan Shuangxing Machine Tool Manufacturing Co., Ltd. are widely used in the mass production of mobile phones, glass, ceramics, connecting rod, compressor cylinder, oil pump blade, bicycle disc brake, valve plate, valve plate, gasket, piston pin, bearing, brake disc, piston ring and other two end-face grinding workpieces. The company covers an area of 26,000 square meters, building area of 12,000 square meters, The main products are LGM75C, LGM50C, SX100-5W, SX150-9W, SX150-12Y, M7675B, MKW7675, M7650B, MY7650B, MW7650B and other horizontal shaft series double end grinding machine; SXM750, SXM580 and other vertical shaft series double end grinding machine.

CNC Double End Grinding Machine SX100D-5W

Acceptance criteria:

1. The geometric accuracy of the machine tool shall be implemented according to the accuracy requirement stipulated in the Contract and standard of JB/T 9907.2 - 2014 and JB/T 9907.4 - 2017 from the Ministry of Industry and Information Technology of the People’s Republic of China.

2. The working accuracy of the machine tool is implemented according to the technical agreement signed by both parties.

3. Acceptance of the test of the work piece shall be made according to the standards recognized by both parties. Before signing the technical agreement, the Buyer needs to provide the technical drawings, work piece grinding range as well as the relevant technical data and requirements. The drawings must be signed and confirmed by both parties in advance.

CNC Double End Grinding Machine SX100D-5W