Connecting Rod Double Side Grinding Machine
1. High efficiency: double endface grinding, can be completed at a time two parallel endface processing, reducing a process, but also eliminates the auxiliary time between processes. In addition, because the workpiece allowance is gradually removed during the grinding process, the larger machining allowance of double face grinding is much larger than that of other grinding machines, and it can remove the machining allowance that can only be removed by several steps of other grinding machines at one time.
2. High processing accuracy: for a long time, most of the workpiece endface grinding methods used through the grinding or single grinding head surface grinding, these two grinding methods of high productivity, low production costs, but the endface dimensional accuracy of the processed workpiece is general, while the double endface grinding through the rotary or linear feeding tray on and off the workpiece, the dimensional and geometric accuracy of the processed endface of the workpiece can reach the P2 and above, and the accuracy is significantly higher than the two commonly used grinding process, and the accuracy is much higher than that of other grinding machines. The precision is significantly higher than the two commonly used grinding methods.
Specialized double endface grinder for connecting rods, with high precision, stable performance and quick and troublesome switching types. It is a complete substitute for imported equipment, suitable for high efficiency and large quantity consumption of connecting rod automatic line, automatic loading, automatic hanging arrangement of discharging, i.e. to prevent bumping and injuring and to reduce the labor intensity, grinding and loading time are completely coincident.
The grinding rods are isolated from each other to prevent mutual collision, and the feeding is smooth, and there is no stagnant rod in the grinding area after stopping the machine. The frequency of grinding wheel dressing can be preset, and after the processing quantity reaches the set value, the grinding wheel will automatically back off to dress; after dressing, it will automatically return to the grinding position, and the system will automatically start the loading of material to be grinded, without manual intervention.
Advantages
1. High degree of automation: double face grinding machine is often used in the stable production of large quantities of workpieces, generally with automatic compensation, can be configured with automatic loading and unloading devices to reduce manual loading and unloading of workpieces. Double face grinding machine is mostly controlled by CNC system, which reduces the labor intensity to a greater extent, reduces the influence caused by manual operation, and makes the processing quality stable and the consistency of workpieces good.
2. A wide range of applications: the workpiece in the horizontal direction by the feeding disk restrictions, vertical direction by the upper and lower grinding wheel restrictions. This positioning method is not limited by the material of the workpiece, thus broadening the scope of application of the machine tool, in addition to bearing rings, piston rings and other steel parts, cast iron parts processing, but also widely used in cell phone screens and other non-magnetic materials and non-metallic materials processing.
Related Products
Submitted successfully
We will contact you as soon as possible