Connecting Rod Machining

In order to meet the needs of the new connecting rod processing technology, many connecting rod production enterprises began to adopt a large number of connecting rod special conveyor, transform and upgrade the processing process of connecting rod, used to improve the product quality of connecting rod and improve the production efficiency of connecting rod, we provide connecting rod special conveyor has a straight line section, right Angle bend section, S bend section, The length of the composition can be varied according to the needs of the processing technology of the connecting rod; Different levels of connecting rod conveying material path, to meet the connecting rod production line of various layout of connecting rod material path. The lifting mechanism is installed on the connecting rod conveying material path, which is used to adjust the height of the V-groove and change the tilt Angle of the connecting rod, which can meet the requirements of different specifications of connecting rod conveying and provide a reliable guarantee for the needs of connecting rod processing technology.

Features and advantages:

1. The width of the connecting rod conveying material is adjustable, and the width adjustment range is 30mm. (can also be specially designed according to requirements). To accommodate different sizes of connecting rods.

2. The height of the big end support rod of the connecting rod in the conveying path is 800mm from the ground, and the height can be designed and adjusted according to the requirements. The lower part has adjusting foot and fixing bracket fine adjustment.

3. The power drive of connecting rod conveying material path adopts integrated deceleration motor, power: 0.25Kw.

4. The standard reciprocating stroke of the connecting rod conveyor: 12mm, can also be designed according to the requirements to meet the requirements of various beats.

5. The connecting rod conveyor is provided with a number of gantry supports, and the spacing between the gantry supports is up to 1.6 meters.

6. The transmission mechanism of the connecting rod conveying material path is provided with a safety protective net cover.

7. The lower part of the connecting rod conveying material is configured with a liquid collecting pan to collect the lubricating oil or cleaning liquid dripping on the connecting rod. The liquid collecting plate is made of 1mm plate with spray paint.

8. The discharge port at the end of the conveyor path of the connecting rod is equipped with a transverse blocking device to prevent the connecting rod from falling.