​Operation and maintenance of double disc grinding machine

Double disc grinding machine is a kind of high efficiency and high precision grinding machine, which is widely used in machinery, automobile, aviation, petrochemical and other fields. This paper will focus on the operation and maintenance of the double disc grinding machine to help users better use and maintain the equipment.

一、Operation

1. Prepare before starting

Before starting the machine, it is necessary to check whether the components of the double disc grinding machine are in good condition, including the grinding disc, bearings, motors, etc. At the same time, it is necessary to check whether the coolant is sufficient and whether the environment around the grinder is clean.

2. Start the machine

After confirming that the components are in good condition, the coolant is sufficient, and the environment is clean, you can start the operation. First start the power supply, turn on the main switch, then press the start button, and wait for the machine to run normally.

3. Adjust parameters

In the process of the machine, it is necessary to adjust the relevant parameters according to different materials and processing requirements, such as disk speed, feed speed, grinding depth and so on. When adjusting parameters, be careful not to exceed the bearing range of the machine, so as not to cause damage.

4. Loading and unloading parts

When loading and unloading work pieces, it is necessary to handle them lightly to avoid collision and falling. At the same time, it is necessary to ensure that the workpiece is firmly installed to avoid accidents during the grinding process.

5. Shut down

After completing the processing task, it is necessary to turn off the main switch and then turn off the power supply. At the same time, it is necessary to clean the debris and dirt around the grinder and keep the working area clean.

二、Maintenance

1. Check regularly

Regular inspection of the machine, including bearing, gear, chain and other components wear, as well as the electrical system and hydraulic system operating conditions. If any problem is found, handle it in time to ensure the normal operation of the device.

2. Cleaning and lubrication

Regularly clean the parts of the equipment, especially the grinding disc and bearing parts. At the same time, the moving parts need to be lubricated regularly to reduce wear and friction.

3. Replace the wearing parts

For wearing parts, such as grinding stones, grinding, etc., need to be replaced regularly. When replacing, it is necessary to select suitable specifications and wear parts with reliable quality.

4. Maintain the hydraulic system

The hydraulic system is an important part of the disc type double disc grinding machine, which needs to check the cleanliness and oil level of the hydraulic oil regularly, as well as the working condition of the hydraulic components. Find problems and deal with them in time to ensure the normal operation of the hydraulic system.

5. Keep records and reports

In the process of using the double disc grinding machine, it is necessary to make relevant records and reports. The records include the running status, maintenance status, and troubleshooting of the equipment. The report is the summary and analysis of the records, which is used to report the work status and equipment status to the superior leadership.

Through the above operation and maintenance work, the normal operation and service life of the double disc grinding machine can be effectively guaranteed. At the same time, users also need to pay attention to safe operation procedures to ensure personal safety and equipment safety.