Operation and maintenance of connecting rod double disc grinding machine

Connecting rod double disc grinding machine is a kind of high precision grinding machine equipment, mainly used for processing connecting rod parts double disc. In order to ensure the proper operation and service life of the equipment, proper operation and maintenance are essential. The following will introduce the operation and maintenance points of the Connecting rod double disc grinding machine in detail.

一、Operation steps

1. Prepare

Before operating the machine, you need to make sure that the power and air supply are connected and that the device is in normal condition. At the same time, prepare the required workpieces and tools, and ensure that the work area is clean and free of debris.

2. Workpiece clamping

Place the workpiece on the grinder and select the appropriate clamping method according to the size and shape of the workpiece. Ensure that the workpiece is accurately positioned and firmly fixed to prevent loosening or vibration during grinding.

3. Adjust the grinding wheel

Select the appropriate grinding wheel according to the type and size of the surface to be machined, and adjust the position and Angle of the grinding wheel. At the same time, it is necessary to check the wear of the grinding wheel and replace the severely worn grinding wheel in time.

4. Adjust working parameters

According to the material, size and processing requirements of the workpiece, adjust the working parameters of the machine, such as grinding speed, feed rate, etc. Ensure reasonable parameter Settings to improve machining efficiency and accuracy.

5. Start the device

After confirming that the preparation work is completed, start the machine and start machining the workpiece. In the process of processing, it is necessary to always observe the processing of the workpiece, adjust the parameters in time or replace the grinding wheel.

6. After processing, turn off the machine and disconnect the power and air source. Clean the work area in a timely manner and put tools and artifacts back in place.

二、Maintenance points

1. Daily maintenance

Before working every day, check whether all components of the equipment are normal. If any abnormality is found, handle it in time. At the same time, it is necessary to regularly clean the dust and debris inside the equipment to keep the equipment clean.

2. Get regular checkups

Regular inspection of the various parts of the grinder, such as wear or loose should be replaced or repaired in time. At the same time, check whether the electrical part of the equipment is normal to ensure the safe operation of the equipment.

3. Grinding wheel maintenance

The grinding wheel is one of the key components of the grinding machine, and the wear of the grinding wheel should be checked regularly. When the grinding wheel is seriously worn, it should be replaced in time to ensure processing accuracy and efficiency. At the same time, the appropriate grinding wheel should be selected and installed correctly to avoid loosening or falling off the grinding wheel.

4. Grease lubrication

The transmission system of the machine needs to be lubricated regularly, and should be operated in accordance with the lubrication requirements of the equipment manual. At the same time, it is necessary to choose the appropriate lubricating oil and pay attention to the moderate amount of oil to prevent too much oil affecting the processing accuracy and equipment life.

5. Use coolant

During the processing process, coolant should be used to reduce the temperature of the workpiece and the grinding wheel to prevent damage to the equipment or affect the processing quality due to overheating. At the same time, the coolant should be replaced regularly and kept clean to prevent contamination or deterioration of the coolant.

In short, correct operation and maintenance is the key to ensure the normal operation and service life of the connecting rod double disc grinder. In the process of use should be strictly in accordance with the operating procedures for operation, and regular maintenance and maintenance work. At the same time, the operator should have the appropriate skills and knowledge to better use and maintain the connecting rod double disc grinding machine.